Nokia 12 GSM MODULE REMOTE I/O Manuel d'utilisateur télécharger pdf (Page 14)

Characters accepted for the message identifier are defined in Chapter 7, except

the space characters.

Note: You cannot use the Remote I/O control if there is no message identifier

defined. In this case, all received short messages will be handled as normal

messages and the inputs/outputs cannot be controlled in the Remote I/O control.

Note: The message identifier is 1-8 characters long and case sensitive.

Figure 2. User Control Mode dialog

10/49

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 52 53

Pas de commentaire

Nokia 12 GSM MODULE REMOTE I/O Manuel d'utilisateur Page 14